Fault Check List - Edy EDPA1001 Bedienungsanleitung

FAULT CHECK LIST

.
The air conditioner does not run
The machine seems to do little
The machine seems to do nothing.
Too noisy
The compressor doesn‟t run.
☆
Never try to repair or dismantle the unit yourself
We declare the model EV9062 series be connected only to a supply with the relevant system
impedance no more than 0.309 ohm. Restrictions to connection may be imposed by the supply
authority on the use of equipment in the actual relevant system impedance at the interface point
on the user‟s premise exceeds 0.309 ohm.
We declare the model EV9061 series be connected only to a supply with the relevant system
impedance no more than 0.466 ohm. Restrictions to connection may be imposed by the supply
authority on the use of equipment in the actual relevant system impedance at the interface point
on the user‟s premise exceeds 0.466 ohm.

Is the air conditioner plugged in?

Is there a power failure?

Is the comp / „full water‟ indicator flashing?

Is the room
temperature?

Is there direct sunshine? (Please put down the
curtain.)

Are too many windows or doors open?

Are there too many people in the room?

Is there something in the room producing lots of
heat?

Is the filter dusty, contaminated?

Is the air intake or output blocked up?

Is the room temperature below your selected
temperature?

Is the machine positioned unevenly so as to create
vibration ?

Is the floor underneath the machine uneven?

Is so, it is possible the overheat protection of the
compressor is on. Just wait for the temperature to
drop.
14
temperature below the set