Feeding With The Breast Milk; What If There Are Problems; Replacement Parts And Wearing Parts - Beurer BY 15 Gebrauchsanweisung

7.4 Feeding with the breast milk

Note
You can use the supplied bottle with the silicone teat when feeding with the breast milk. Alternatively,
you can also express the breast milk with an NUK or Avent bottle before feeding (corresponding NUK /
Avent adapter is included in delivery).
• Prior to feeding, ensure the bottle has been disinfected before filling it with the breast milk that has been stored.
• To defrost breast milk, store it overnight in the fridge, so as to retain the nutrients. Once the breast milk
is defrosted, it must be used within 24 hours. Breast milk should only be defrosted in warm water in es-
pecially urgent cases.
• If the breast milk smells unpleasant, it should be disposed of immediately.
• Never heat up breast milk in the microwave as it may be heated unevenly and could burn your child when
they drink it.
• If heating up the breast milk, check its temperature before feeding it to your baby.

8. What if there are problems?

Problem
There is no suction from the breast pump.
No breast milk is being pumped.
Pumping the breast milk is causing pain.
The breast milk is leaking out underneath the sili-
cone cushion.
One of the breast pump components has become
altered or damaged.

8.1 Replacement parts and wearing parts

Item
Bottle with teat and bottle cap
Adapter for Avent and NUK bottles
2 silicone cushions (small and standard)
Manual pump attachment including silicone cush-
ion (standard size)
Bottle stand
Potential solutions
• Check all parts of the breast pump are correctly
assembled.
• Check whether the pump attachment is correctly
placed on the breast.
• Ensure that there is no milk remaining in the sili-
cone valve and obstructing the milk flow.
• Try to relax and then attempt it again a few minutes
later. As you use the breast pump more and more,
you will find it easier to pump milk.
• Set the suction level to MIN.
• Consult your doctor.
• Remove the silicone cushion and re-attach it. En-
sure the silicone cushion is correctly positioned
and firmly secured to the pump attachment.
• Lean your upper body forwards slightly.
• Do not use any corrosive, gaseous cleaning agents
or solvents.
• In some cases, marked fluctuations in tempera-
ture can damage the plastic on the breast pump.
• If any of the parts becomes damaged, stop using
the breast pump.
Item number
163.719
163.720
163.721
163.722
163.723
16