Operation; Unintended Operation; Function Of The Front Sensor; Disposal Of Packaging - Kessebohmer TouchControl Bedienungsanleitung

Operation

The opening procedure activation is carried out by knocking on the front. The drawer support is
activated by pulling on the front. The closing procedure is carried out manually. The automatic
closing and retaining of the larder is activated before completing the closing procedure.
The larder pull-out unit can be opened manually if a power failure occurs or if
the TouchControl malfunctions. The user will only notice a slightly increased
ope ning resistance.
Note
Improper operation
Do not stop the larder
when it is opening!
Warning
Front sensor function
The task of the front sensor is to evaluate the knocking signal and to trigger the opening
procedure. The front sensor can be activated or deactivated using the fitted switch. The
automatic opening by knocking is prevented if the front sensor is deactivated. The opening
support remains ready for use.

Disposal of packaging

All packaging materials used are environmentally friendly and can be recycled. Your retailer
or local disposal service will be able to provide you with up-to-date information about disposal
options.
Danger of suffocation!
Do not allow children to play with packaging and packaging components.
Films and other packaging materials can cause suffocation.
Danger
How to dispose of the unit
Environmentally friendly disposal allows valuable raw materials to be re-used. Your local or
regional administrative authority will be able to tell you about the options for disposing of your
unit in an environmentally friendly and orderly way.
OPERATING INSTRUCTIONS TOUCH CONTROL l 17