Safety; Important Safety Instructions - Kessebohmer TouchControl Bedienungsanleitung

Safety

The TouchControl system complies with state-of-the-art safety engineering. Despite this,
residual risks may result when this operating instructions is not observed. Please consider
that Kesseböhmer GmbH does not accept any liabilities or guarantees for subsequent damage
that result from not observing the operating instructions.

Important safety instructions

Carefully read through the operating instructions. Keep the operating instruc-
tions in a safe place. If this system should be handed over to third parties, this
operating instructions should also be passed over as well.
All safety and warning instructions should be observed. Follow all instructions
Warning
in the operating instructions.
Do NOT use the TouchControl system near to water or in rooms with humidity.
Clean the TouchControl system ONLY using a dry or slightly moistened cloth.
Make sure that the TouchControl system is not covered by any objects or that
products such as foodstuffs are not tipped into it.
The TouchControl system is only allowed to be connected using the provided
mains connection cable according to the technical data specified on the
type plate. Avoid overloading or bending the power supply cable. Protect the
TouchControl system against oil and aggressive cleaning agents. Only allow
ALL repair work to be carried out by trained customer service technicians.
Repairs are necessary when the device has been damaged in such ways,
e.g. by damage to the power supply cable or plug, by spilling liquids onto it, by
objects falling into it, by rain or moisture, when it does not function properly or
when it is dropped.
Separate the TouchControl system from the mains power supply when it is not
used over longer periods or during electrical storms. To switch the TouchControl
system off, disconnect the mains plug. This device must be protected against
rain and moisture to reduce the risk of fire and electric shocks! The product
should not be exposed to dripping or spraying liquids. Objects filled with liquids
should not be placed directly above the drive housing.
OPERATING INSTRUCTIONS TOUCH CONTROL l 13