Tens Programmes - bewell connect BW-TS1 MyTens Pro Gebrauchsanweisung

EMS : wave form

4.3.2. TENS PROGRAMMES

Traditional transcutaneous neurostimulation programme :
A common transcutaneous neurostimulation programme is performed with a high frequency
stimulation. This stimulation is intended to block the transmission of the pain signal to the nervous
system. Generally, people use traditional transcutaneous neurostimulation for a session of about 30
minutes. It is possible to use these programmes for a variable period and frequency according to
what you want. It is normal to feel the effects of this programme more intensely during the stimula-
tion and to experience its decay after the end of the session. To gain in efficiency, it is necessary to
adjust the intensity of the programme, avoiding any painful or unpleasant sensation.
Burst transcutaneous neurostimulation programme :
A burst programme (Burst TENS) allows high frequency stimulation in the form of series of
impulses. It enables the release of endorphins. It is possible to use the transcutaneous neuro-
stimulation in bursts for 30 minutes. The frequency can be up to several times per day, 3 times
for example. For a sensation of strong stimulation, it is advisable to adjust the intensity of the
burst programme. An unpleasant feeling may then appear. You can also adjust the intensity of
the programme at a level leading to perceptible muscle contractions in the stimulation area.
These contractions are not dangerous. However, if you experience discomfort, it is advisable to
decrease the intensity of the programme, change or move the electrodes. The burst transcuta-
neous electrical neurostimulation (Burst TENS) can trigger a muscle contraction in the area of
stimulation. We therefore ask you to perform this programme at rest.
38 BewellConnect - BW-TS1 - User Manual - 072015
Summary Table of the TENS Programmes
TENS
Treatment Treatment Treatment
Name
site time phases
Shoulder Phase 1
pain and
Phase 2
Shoulder wrinkled 30mn
shoulder
Phase 3
froissée
Phase 1
Phase 2
Pain in
Phase 3
Lumbar
the lower 30mn
areas
Phase 4
back
Phase 5
Phase 6
Pain in the Phase 1
Elbow 30mn
elbow
Phase 2
Phase 1
Phase 2
Pain in the
Forearm 30mn
forearm
Phase 3
Pain in
the wrist
Wrist and carpal 30mn Phase 1
tunnel
syndrome
Phase 1
Phase 2
Phase 3
Pain in
Hip 30mn
the hip
Phase 4
Phase 5
Phase 6
Thigh Sciatic pain 30mn Phase 1
Knee Knee pain 30mn Phase 1
BewellConnect - BW-TS1 - User Manual - 072015
Impulses
Frequency Width
Wave form Description
(time) in µS
2Hz (10s) 250
4Hz (8s) 250
Continuous
CONT
output
6Hz (6s) 250
2Hz (10s) 250
4Hz (8s) 250
6Hz (6s) 250
Continuous
CONT
output
2Hz (10s) 250
4Hz (8s) 250
6Hz (6s) 250
2Hz (3s) 150
Alternating
HANS
output
100Hz (3s) 200
2Hz (3s) 200 HANS
Sortie
alternative
100Hz (3s) 150 HANS
Up : 1,5s
Down : 3s
3Hz 250 EMS
10s cycle
with 2/5
strength
Continuous
2Hz 250 CONT
output
6Hz (30s) 250
6Hz (30s) 250
8Hz (20s) 250
Continuous
CONT
output
8Hz (20s) 250
10Hz (20s) 250
10Hz (20s) 250
Up : 0,5s
Con : 7s
100Hz 200 EMS
Down : 0,5s
Rest : 7s
On : 0,25s
100Hz 150 BURST
Off : 0,25s
39