STOLZENBERG CS 650 Bedienungsanleitung Seite 8

DE
1.4
Transport the machine only in the switched-of condition, sufciently well fastened.
EN EN EN
s
1.5 !~
FR
Disturbance
NL
Sweeping result unsatisfactory
ES
1.6
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
Before starting up the machine
• Check machine for visible damages and malfunctions.
• Remove and empty the dustcontainer.
• Search brush - roller tunnel for jammed particles and sei-
zed up dirt that may narrow the brush tunnel and obstruct
free roller brush movement. Remove if necessary conside-
ring the security tips.
Additionally all 50 hours
• Check if sweeping rollers are worn or cluttered. Replace
if required.
1.7
Dispose of faulty parts, especially electrical components, batteries and plastic parts according to the locally applicable
waste disposal specifcations. Used batteries must be disposed of according to Directive 2006/66/EC.
8
Possible Cause
Sidebrush or Mainbrush rollers worn.
Mainbrush is jammed by dirt, cords, strings or the like.
Sidebrush is jammed by dirt, cords, strings or the like.
Dustcontainer is full.
Remedy
Replace
Dismount Mainbrush an clean it. (6.2)
Dismount Sidebrush an clean it. (4.1)
Empty the dustcontainer.
Additionally all 100 hours
• Check if roller belt is elongated or loosened.
• Check all bearings for wear.
• Inspect gaskets for signs of damage, and replace if neces-
sary
Additonally
• Check the tire pressure on all wheels manually and cor-
rect to the target pressure. (1,5 bar / 21,75 psi).