STOLZENBERG CS 650 Bedienungsanleitung Seite 7

- Unless mentally and physically capable of following ma -
chine instructions.
- In areas that are too dark to safely see the controls or ope-
rate the machine.
- If not in proper operating condition.
- Without hopper and/or flter in place.
2. Before operating machine:
- Make sure all safety devices are in place and operate pro-
perly.
3. When operating machine:
- Use only as described in manual.
- Do not pick up objects such as cords, strings, wires that
may entangle brush.
- Report machine damage or faulty operation immediately.
- Do not leave unattended or on an unlevel surface.
- Do not allow children to play on or around machine.
- Keep children and unauthorized persons away from ma-
chine when in use.
- Go slow on slippery surfaces.
- Do not operate on inclines that exceed 2 %.
- Do not use machine to transport people or objects.
- Wear a dust mask, protective glasses and gloves in dusty
environments.
- Keep hands away from spinning brush.
- Use caution when lifting full hopper to avoid back strain.
- Wear heavy gloves when removing sharp objects from
hopper.
- Turn machine power of if brush becomes obstructed or
machine malfunctions.
4. Before leaving or servicing machine:
- Stop on level surface.
- Turn machine power of.
5. When servicing machine:
- Turn machine power of.
- Disconnect battery cable and charger cord before working
on machine.
- Wear protective gloves and glasses when handling batte-
ries or battery cables.
- Avoid contact with battery acid.
- Use manufacturer supplied or approved replacement
parts.
- All repairs must be performed by a qualifed service per -
son.
- Avoid moving parts. Do not wear loose clothing or jewelry
and secure long hair.
- Do not power spray or hose of machine near electrical
components.
- Do not modify the machine from its original design.
- All work must be done having enough visibility and/or
appropriate lighting.
- Wear personal protective equipment as needed.
6. When transporting machine:
- Turn machine power of and remove key.
- Get assistance when lifting machine.
- Use a loading ramp that will support the weight of the ma
chine.
- Do not wheel up or down stairs.
- Use tie-down straps to secure machine when transporting
by vehicle.
1.2
Accessories and spare parts must conform to the require -
ments of the manufacturer. This is ensured by using genui-
ne replacement parts.
1.3
1. Main Power Switch
2. Battery Discharge Indicator
3. Pressure Indicator
4. Charging Socket
5. Cover
6. Side Brush
7. Front Cover
8. Dust Container
9. Handle Quick Release
10. Main Brush
11. Main Brush Drive
5
6
7
1
1
1
4
2
3
8
9
11
10
DE
EN
FR
NL
ES
7