Giesemann GEMINI Bedienungsanleitung Seite 13

·
Preview of daycycle
·
Move the daycycle
·
Touch a switching point of the current-
ly selected colour channel to move.
Points are removed by double-clicking
or new ones can be set by double-
clicking at any position.
·
For a simple daycycle, a fairly simple
profile with only few switching points
is usually sufficient.
·
For moon simulation, first select your
light ("Device # 1") and a colour chan-
nel. As the Gemini T5 lamps are not
dimmable, it is recommended to use
one of the LED channels (A, B or C).
·
"Adjust" shows the gradient curve of
the moonlight in the 28-day cycle. In
the bottom, you set the maximum in-
tensity as well as the current moon day
for the simulation.
·
Additionally set the time range during
which the moon simulation is executed
daily.
Preview
Move
13