IFM Electronic E70211 Beschreibung Und Betriebsanleitung Seite 5

Safety notice
AS-i products of ifm electronic are intended solely for use in systems
in accordance with the AS-i specification.
Any other use is not in accordance with purpose.
Addressing
Important!
1. There may be no data traffic
on the yellow AS-i line before
addressing takes place (if
necessary reset at AS-Inter-
face module).
2. The power supply must be on
during addressing.
Plug/bolt the M12 plug of the IR
interface adapter to the relevant
connection of the addressing
unit.
Plug the infrared head of the IR
interface adapter onto the AS-
Interface module (see drawing).
Ensure that it is fixed firmly to the
coding element.
Perform addressing as outlined in
the description for the addressing
unit.
Briefly switch off power supply
before master operation.
AS-i module
Plug infrared head onto the
AS-i module
LEDs
Fixture infrared
adapter
Infrared
adapter
E70211