Set Alarm Time - Diesnerfunk T641-F Bedienungshandbuch

T641-f_om_German_French_Eng.fm Page 22 Friday, November 28, 2003 5:04 PM
11. If no button is pressed for 30 seconds, the unit will return to
idle mode automatically without save. All changes are ignored
- nothing is saved.
Note: In Clock Edit Mode, pressing START/STOP button again and
again will change the edit field as follows: second -> minute -> hour -
> 12/24 hour format -> exit (back to idle mode).

Set Alarm Time

1. Under idle mode, press MODE button once. This action
enters Alarm Edit Mode. The Alarm icon is ON(If you enable
Alarm function before.) or flashing(If you do not enable the
Alarm function before). The 1st row of display shows "ALM"
message.
2. Press START/STOP once to select Alarm Hour to edit. The
Hour digits will flash.
3. Press and release RESET/SET button once to count up 1
hour. Press and hold RESET/SET button will make Fast Hour
count up.
4. Press START/STOP again to select Alarm Minute to edit. The
Minute digits will flash.
5. Press and release the RESET/SET button once to count up 1
minute. Press and hold RESET/SET button will make Fast
Minute count up automatically.
6. Press START/STOP again to save, current Alarm icon is on or
flashing.
7. Press and hold RESET/SET button to toggle the enable/
disable Alarm. Alarm icon is on for Alarm set, Alarm icon flash
for not selected(in idle mode, Alarm icon is ON when Alarm is
set).
NOTE:
• The step 7 can be operated following Step 1 also.
• Without further key operation for 3 seconds, the unit return to
idle mode when enable/disable alarm setting.
8. If no button is pressed for 30 seconds, the unit will return to
idle mode automatically. (To exit manually, press MODE but-
ton five times.)
-22-