Connection & Setup; Connecting The Adapter - Plantronics VistaPlus DM15 Bedienungsanleitung

CONNECTION & SETUP
GB
DIAGRAM KEY
1 Handset Port
2 Headset Port
3 Telephone stub cable
(pre-connected to port)
4 AC/DC Power Adapter
5 AC/DC Power socket
6 Battery compartment
7 Tone Control

CONNECTING THE ADAPTER

Refer to Figure 1. Connections
CONNECTING THE DM15
! CAUTION:
that it be installed in the proper port of your telephone. Follow these
instructions carefully.
1. On the DM15, locate the free end of the stub cable already plugged
into the port with the telephone symbol.
2. Follow the curly cord of your handset to the port where it plugs into
your phone. Remove the curly cord plug from your phone and replace
it with the free end of the Short Cord.
3. Plug the curly cord of your handset into the port with the handset
symbol on the DM15.
4. Connect the AC/DC Power Adapter to the DM15 Adapter and plug
into your power source.
5. Plug your headset (not supplied) into the Quick Disconnect™ cord
from the DM15 Adapter.
2
It is important for correct and safe operation of the DM15
8 Volume Control
9 Mute switch
10 Headset/handset switch
11 Compatibility switch
12 Microphone level control
13 LED Indicator
14 Quick Disconnect (QD)