Werbung
A
Manual version :
Motorised version :
FPACO00068
Mains voltage.
- Check the conformity of the mains voltage input with the values indicated
on the identification plate of the PSU (mains voltage & lamp power).
Lighting unit / Power supply connection.
- Connect the lighting unit's power cable B by passing it
inside the yoke.
- Leave a little slack and then block the cable B into the lock d .
- Place the lamp into position - refer to section A - 7.
- Connect the cable e to the mains.
CAUTION - For your security !
- Never open the lamp house's bonnet and trapdoors
when the lighting unit is on.
- Do not change the safety switches.
- Never connect to a dimmable channel.
- Use only when the lamp is in place.
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.fr
CONNECTIONS.
d
TECHNICAL FILE
FOLLOWSPOTS
Make sure the fan is working correctly
when switching on the unit.
B
Power supply unit (P.S.U.) :
1200W
e
DESCRIPTION : 1200W
A
1200W Hot restrike followspot.
B Lighting unit's power cable.
Cable 18G 1,5mm
with 16 x 16A male HARTING connector.
Detachable on the motorised version.
DESCRIPTION : 1800W
A
1800W Hot restrike followspot.
B Lighting unit's power cable.
Cable 18G 1,5mm
with 16 x 16A male HARTING connector.
C
Power supply unit.
LUCY / SK /
FLO / VICTOR
Section A - 5
1800W
C
• Use only the listed cables to connect to the mains -
Refer to the respective PSU technical fi le.
2
, length 3m equipped
2
, length 3m equipped
Werbung
