Changing The Opening Direction Of The Doors - OK. OFK 46412 A2 Bedienungsanleitung

• Louder sounds like popping or clicking may be heard for a short time as the
refrigerator's compressor switches on.

CHANGING THE OPENING DIRECTION OF THE DOORS

It is recommended that changing the opening direction of the doors should be done
with a helper. You will need two spanners No. 8 and No. 10 and a head screwdriver.
When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator
horizontally.
Do the actions below in the order they are listed:
WARNING! Turn off the appliance and pull the plug out of the electricity supply socket.
1. Remove the covers c from the body of the refrigerator and of the inner side of the
door. Also remove the upper bracket 6 together with the nut and washers and the
spacer under the bracket.
2. Remove the door of the refrigerator compartment 1. Remove the stopper 5 from
the bottom of it. On the other side of the door attach the stopper intended for
doors that open on the left (you will find it in the packet).
Remove the middle bracket 4 together with the washers on the axle and the
3.
plastic spacer.
4. Remove the freezer compartment door 3.
5. Remove the bottom cover 11 together with the small cover 10.
6. Remove the bottom bracket 2 together with the washers on the axle and the
plastic spacer. Unscrew the axle with the washers and screw it into the aperture
provided on the other side.
OFK46412A2
DE
Version OK1.0_10/2014 Seite 31 von 36