Audio Setup Page - LENCO DVP-1210 Benutzerhandbuch

4:3 LETTERBOX: if you have a normal TV. In this case, a wide picture with black bands on the upper and lower
portions of the TV screen will be displayed.
16:9: wide screen display.
TFT DISPLAY: Select the TFT display to 16:9 or 4:3.
Angle Mark
Displays current angle setting information on the right hand corner of the TFT screen if available on the disc.
OSD Language
You can select your own preferred language settings.
Closed Captions
Closed captions are data that are hidden in the video signal of some discs. Before you select this function,
please ensure that the disc contains closed captions information and your TV set also has this function.
Screen Saver
This function is used to turn the screen saver On or Off.
Auto Standby
This function is used to select auto standby settings after 3 or 4 hours.
3 HOURS: the unit will turn to standby mode after 3 hours if there is no interaction from user within this period
of time.
4 HOURS: the unit will turn to standby mode after4 hours if there is no interaction from user within this period
of time.
OFF: the auto standby function is disabled, and unit will stay in "on" mode even if no interaction from user.

Audio Setup Page

Audio Setup Page
Downmix
This options allows you to set the stereo analog output of your DVD Player.
 LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
 Stereo: Select this option when output delivers sound from only the two front speakers.
Dolby digital
The options included in Dolby Digital Setup are: 'Dual Mono' and 'Dynamic'.
Dual Mono
 Stereo: Left mono sound will send output signals to Left speaker and Right mono sound will send output
signals to Right speaker.