Intercom Function - urmet domus 1183/2 Bedienungsanleitung

DOOR OPEN LED
The apartment units provided with indicator LED to indicate the open state of the door.
The LED will light up if the door of the main calling station is open and will blink if the secondary calling
station door is open.
The function is only active for the last called door phone or on which the door opening button was pressed
and corresponding to the last calling door unit.
§
The function is able only if is a sensor is connected to the calling station.
BUTTONS FUNCTIONS
STATE STAND-BY WAITING FOR
AND ON HOOK PICK-UP
BUTTON (receiving a call)
Special Special
BUTTON
function 1 function 1
Special Special
BUTTON
function 2 function 2
Garage door Garage door lock
BUTTON
lock release release
Door lock Door lock
release release
OPTIONAL PROGRAMMING FOR ADDITIONAL FUNCTIONS
The following programming operations are needed after testing the basic operation of the system, only if
are required.

INTERCOM FUNCTION

Buttons , , can be programmed in 2Voice systems for intercom call functions.
One button can be programmed to call another user in the column or to call an indoor station in parallel. All
indoor stations of the called user will ring in the fi rst case. Only the specifi cally programmed indoor station
will ring in the second case.
14
AUDIO STAND-BY
AND OFF-HOOK
Special Programmable intercom call 1
function 1 (Default: not programmed)
Special Programmable intercom call 2
function 2 (Default: call to switchboard)
Garage door Programmable intercom call 3
lock release (Default: not programmed)
Door lock Door lock
release release
DS1183-004A
INTERCOM FUNCTION BETWEEN VARIOUS USERS
– Go to the indoor station to be programmed as caller (indoor station A).
– Hold the door opener button pressed and pick up the handset. The indoor station A outputs a tone to
indicate that programming mode is in progress.
1
– Press the button to be programmed. The indoor station will output a confi rmation tone.
3
– Go to the user that the button will call (user B) and press the door opener button. The indoor stations will
be beep to indicate that they have been programmed.
Alternatively, go to a calling station and press the calling button of user B. The indoor station being
programming (A) will beep to indicate that it has been programmed. The indoor stations of user B will ring
when this occurs. Ignore this call.
B
– Hook up the handset of indoor station A. It will beep to indicate exit from programming mode.
– Check programmed function: release the handset A and press the programmed button. Check that all
indoor stations of user B ring and check audio.
– You will need to program indoor station B to call A to make the opposite call possible.
DS1183-004A
A
2
A
USER B
15