Intended Use - BEHAbelt EErgo Bedienungsanleitung

After each welding procedure the paddle welding
plate has to be cleaned with a soft cotton cloth. In
no case use peaked or sharp-edged objects for clea-
ning. Only use clean paddle welding plates as other-
wise burnt welding remains might cause a heavy
impact on the quality of the welding seam.
Never operate the paddle welding tool unattended!
Put down the running tool only for a short period of
time. In longer lasting breaks it is absolutely neces-
sary to unplug the product.
Never use the paddle welding tool without the
attached paddle welding plate!

1.5 Intended use

The unit may be used only under the conditions and for the
purposes for which it was designed. Therefore, especially
observe the safety instructions and technological specifica-
tions such as environmental conditions and use in a dry
environment.
Only qualified personnel instructed in the use may operate
the product. Please ensure that the product is only used in a
safe environment.
The product meets the current regulations and standards with
respect to the electromagnetic compatibility. Very rarely it
may occur that the product has a negative impact on other
electrical or electronic devices or the functioning gets
disrupted through other electrical or electronic devices.
30