Wireless Security - D-Link DHP-1565 Installationsanleitung

PRODUCT
SETUP
iNstallatioN - aP MoDe
AP/ROUTER
MODE SWITCH
WELCOME TO THE D-LINK SETUP WIZARD
DHP-1565
ON/OFF
SWITCH
COMMON CONNECT
BUTTON
PLC NETWORK SECURITy
Press the Common Connect button for
one to three seconds. The PowerLine
LED should start to blink.
Plug the second PowerLine device (for
example the DHP-1565 in Room B as
seen on page 6) into a power outlet.
Press the Common Connect button on
this PowerLine device for one to three
seconds.
Wait for both devices to reboot (all LEDs
will turn off and on). When the PowerLine
LEDs on both devices are steadily
lit, the two devices will be networked
together securely.

WIRELESS SECURITy

Open a web browser, enter http://
dlinkrouterWXYZ (WXYZ: four-digit suffix
of the LAN MAC address MAC address
located on the
bottom of device) and then press Enter.
Follow the Setup Wizard to assist you in
establishing secure wireless network.
(Please refer to "Setup Wizard" in the user manual for
)
detailed installation information.
7