Technical Data; Correct Use - Hilti SF150-A Bedienungsanleitung

2. Technical data

SF150-A battery drill driver
Voltage:
Drill driver weight incl. battery and chuck:
Dimensions (l×h×w):
Speed (no load):
Chuck / Quick-release chuck capacity:
Torque:
Torque adjustment:
Typical weighted vibration at the handle:
A-weighted emission sound pressure level:
Speed control:
Reversing switch:
Spindle lock:
Motor brake:
Dust-tight enclosure and permanent lubrication (maintenance free)
Battery
Voltage:
Capacity:
Weight:
Temperature monitoring:
Type of cell:
No. of cells:
Right of technical modifications reserved
2.1 Applications
Type of screw / application
Driving chipboard screws
Driving wood screws into plastic anchors
Driving self-drilling screws
Drilling into softwood / particle board
Drilling into with a hole saw
Drilling into with a HSS twist-drill

2.2 Correct use

– Driving and removing screws
– Drilling in steel and wood
The working environment may be on a construction site or in a workshop and may consist of renovation, conver-
sion or new building work.
8
Printed: 07.07.2013 | Doc-Nr: PUB / 5070636 / 000 / 00
15.6 Volt
2.18 kg
235×250×74 mm
1st speed: 0–450 r.p.m.
2nd speed: 0–1450 r.p.m.
1.5–13 mm
max. 29 Nm (set at drilling symbol)
2–12 Nm (at 15 settings)
less than 2.5 m/sec 2
less than 70 dB(A); For the given sound power level as per
EN 60745, the tolerance is 3 dB.
electronic via on-off switch
electronic with switching lock when running
when the drill driver is switched off
activated by the control switch
SFB150
15.6 Volt
15.6 Volt×2.0 Ah = 31.2 Wh 15.6 Volt×3.0 Ah = 46.8 Wh
0.89 kg
yes
nickel-cadmium
Sub C design
13
Size
8×80 mm dia.
–
S-MD01 4.8×19 mm
25 mm dia.
102 mm dia.
13 mm dia.
SFB155
15.6 Volt
0.96 kg
yes
nickel-metal hydrid
Sub C design
13
Speed
1st (low) speed
1st (low) speed
2nd (high) speed
2nd (high) speed
1st (low) speed
2nd (high) speed