Battery - Chris Benz Chronograph 300M Bedienungsanleitung

11. FACTORY SETTING (RESET)
PROCEDURE
Unscrew the crown to release it and pull it out two steps.
Simultaneously press button (A) and (B)
The all reset is complete if the function hand moves slightly.
Pressing button (A) will allow the mode hand and the function hand to move simultaneously.
Set both of these to the „0" position. Move the two hands forward rapidly by pressing button
continuously.
Align the second hand in the „0" position by pressing button (B).
Move the two hands forward rapidly by pressing button
Set the correct time.
Refer to capter „SETTING THE TIME AND CALENDAR" for instructions.
Push the crown back to its original position, press down and turn it to screw lock it back in place.
The watch will restart in the time mode.
52
and then release them.
(B) continuously.
12. THE BATTERY
BATTERY LIFE
The new battery installed in this watch will last approximately 2 years.
THE ORIGINAL BATTERY
The battery in the watch at the time of purchase is one to test the function and performance of
the watch. Please be aware that this battery may not last for the 2 years estimated for normal
(A) batteries.
BATTERY REPLACEMENT
All battery replacements should be done by our Service Center. To replace the battery, please
contact the place of purchase or contact a Service Center directly.
When replacing the battery, inspection of water resistance and other parts should be conducted
and packing materials replaced as necessary.
Before using this watch for long periods overseas, it´s recommended that a battery replacement
as well as service of your watch should be executed. A charge for battery replacement and related
inspection and parts replacement will issued, even within the specifi ed warranty period.
53