Kitchener MS-106114 Gebrauchsanweisung Seite 3

Cast Aluminum Meat Slicer
MS-106114 & MS-106115
INSTRUCTION MANUAL
Cast Aluminum Meat Slicer
Notice
• The power must be complied with electric requirements on the label rating, it will cause the serious trouble of
the fire or the machine if improperly use.
• The machine must be earthed when using, it is dangerous to get an electric shock if not ground or not reliable to
be grounded.
• Please turn off all switch and unplug when Emergency happen.
• The hand or other part of body not allow to enter workspace when the machine open, or will hurt you.
• The machine should be repaired by manufacturer or agent if the machine faults.
• We are not responsible for hurting or equipment fault as self amending machine.
• When the electric wire damage, must instead of it.
• The electric wire must be used special soft wire, buy it from manufacturer or repair department.
• The machine can not be wash by water, the machine is not the waterproof structure, it will cause get an electric
shock and damage the mechanical departments and electric parts.
• Please turn off all switches when not operate and unplug.
• Please stop operate and unplug when workman clean the machine.
• Must to stop the machine operate when find the machine operate unusually.
• Often to check blade-cover, table loading meat, slice and other parts whether tight or damage.
• Can not cut the frozen meat below the temperature of -6˚C.
• Please attach the manual operation when resell the machine.
• Please contact with our when damage or lose the manual operation.
• Please contact us when you meet other items which not detail in the manual operation.
Ground terminal must be ground before the slicer is fixed.
Avoid resulting in personal server injury due to leakage.
Slicer operates automatically; keep hand clear, Failure to
comply may result inpersonal server injury due to leakage.
Clean and change blade of slicer, be careful of blade-edge
hurt your finger.
Main Technical Specifications
Model: 9" MS-106115
Voltage 220V 50HZ or 110V 60HZ
Power 150W
Slicing Thickness 0.2~12mm
Blade Diameter 220mm
Max Slicing Width 160mm
Weight 12kgs(12.2kgs)
Measurement 450x378x350mm
7.5" MS-106114
220V 50HZ or 110V 60HZ
120W
0.2~12mm
195mm
160mm
11.5kgs(11.7kgs)
399x375x303mm
1 OF 3