Intended Use; Parts Package; Connecting And Operating - ClickTronic 60809 Betriebsanleitung

3 Intended Use:

device only in dry interior rooms. The symbol
with the house reminds you of that. If you do not
attend to these regulations and notes on safety,
it might causes fatal accidents, injuries and da-
mages to persons and property.

4 Parts Package:

• 1 pc. Full HD switch
• 1 pc. power supply 5 V DC
• 1 pc. IR remote control
• 1 pc. user's manual

5 Connecting and Operating:

The Full HD Switch is designed with 3 operation
modes.
Step 1:
Step 2:
Step 3:
Step 4:
Note:
1. After plugging in the DC 5V power supply, the
power can be switched on. You are free to
control the Full HD switch by remote control,
manual selecting or auto switching.
2. The SELECT/AUTO button can also be used as
an auto mode control button. Press the button
for 3 seconds to switch on or off the auto swit-
ching function.
3. When the AUTO LED light is ON, the Full HD
switch can be operated under remote control,
manual selecting and auto detecting.
You can switch input sources by these
12
It is not allowed to use the device
in other ways than described in chapter
"Description and Function". Use this
Connect the HDMI
sources (SAT-Receiver, DVD Player etc.)
to the input ports of the Full HD switch.
Connect the HDMI
display to the ouput.
Plug the 5 V DC power supply to the Full
HD switch.
After you finished connecting, the pow-
er indication LED will be lighted up (red).
The CEC function LED lights up (blue)
and one of the input indication LEDs will
be lighted up after the input source is
selected (green).
cables from the HD
TM
cable from your HD
TM
Clicktronic®