Intended Use; Parts Package - ClickTronic 70281 Betriebsanleitung

3 Intended Use:

device only in dry interior rooms. The symbol
with the house reminds you of that. If you do not
attend to these regulations and notes on safety,
it might causes fatal accidents, injuries and da-
mages to persons and property.

4 Parts Package:

• 1 pc. Full HD Splitter
• 1 pc. power supply 12 V / 2 A DC
• 1 pc. user's manual
Front view:
Rear view:
5 Connection, Implementing and
Operation:
5.1Connection and Implementing
1. Connect the HDMI
to the input of the Full HD splitter.
2. Connect the HDMI
to the outputs of the Full HD splitter (Output
1/2/3/4).
3. Setting the resolution of the outputs:
Set the output resolution of the source device
first, make sure the resolution can be
displayed on all connected display devices.
For example, if you set the output resolution of the
source device to 1080p, make sure all display de-
vices can display 1080p resolution. If any connected
display device cannot support 1080p resolution, the
display device will show no pictures.
4. Plug the 12 V DC power supply into the Full HD
splitter. When connecting is completed, the
HDTV signal will be distributed to each HDTV.
5. When all connections are set, the output sig-
nal will be displayed at al HD displays.
6. To get a better performance, restart the Full
HD splitter. This way you also make sure,
HDCP is working properly.
12
It is not allowed to use the device
in other ways than described in chapter
"Description and Function". Use this
cable from the HD source
TM
cables from your displays
TM
Clicktronic®