ClickTronic 60809 Betriebsanleitung Seite 13

three functions.
4. When the AUTO LED light is OFF, the auto
switching function will be disabled. The Full
HD switch can be operated under remote
control and manual select only.
5. If the power indication LED light (Red) is
flashing, the Full HD switch is detecting and
connecting the source. After the source is
detected and connected, flashing will stop.
If flashing continues, check the power of your
source being on, or check the HDMI
for being working the right way.
6. The Full HD switch memorizes the latest input
port. For next use, the Full HD switch will
detect and connect the latest input port first.
Operation:
IR Remote operation mode:
Use the IR remote control to switch on the Full
HD switch, the power indication LED on the
front panel will shine. In the IR remote operation
mode, use the number buttons to toggle bet-
ween the sources, or use the forward and back
button to select input sources.
Clicktronic®
cable
TM
13