Herunterladen Inhalt Inhalt Diese Seite drucken

Led-Bedienfeld; Control Panel; Signalling Led Panel - HIDROS SCH 50 Installations-, Betriebs- Und Wartungsanleitung

Inhaltsverzeichnis

Werbung

4.3 LED-Bedienfeld

Die
Geräte
sind
ausgestattet, die durch Aufleuchten den
jeweiligen Betriebszustand anzeigen:
Stromversorgung (grün): zeigt an, dass
der grüne Schalter in Position ON steht
und
dass
der
Luftentfeuchter
Stromnetz angeschlossen ist.
Kontrolllampe Kompressor (grün): zeigt
den Kompressorstatus wie folgt an:
Dauerlicht: Kompressor läuft;
langsames Blinken: Kompressor bereit
zum Start;
schnelles Blinken: Abtropfphase nach
der Abtauung.
Kontrolllampe Alarm (rot): indiziert einen
Alarmzustand wie folgt:
Dauerlicht: Sammelstörung;
Blinken: Der Abtauzyklus wurde nicht
innerhalb der Maximalzeit vollzogen;
Kontrollampe Abtauung (gelb); indiziert
die Abtauphase
Kontrollampe Entfeuchtung (grün): zeigt
an,
dass
sich
Entfeuchtungsmodus befindet;
Kontrollampe Kühlung (grün):zeigt an,
dass sich das Gerät im Kühlemodus
befindet;
mit
Kontrolllampen
am
das
Gerät
im
Swimmbadluftentfeuchter SCH – Bedienungs- und Wartungshandbuch
SCH swimming pool dehumidifiers – Use and maintenance manual
4.3 CONTROL LED PANEL
The units are equipped with signal lamps
indicating
the unit´s operational status as
follws:
-
Electrical supply LED (green): indicates
that the green switch has been turned
into ON position and that the unit is
electrically supplied;
Compressor LED (green): indicates
the compressor status with the following
meanings:
LED ON: compressor running;
LED
slowly
ready to start;
LED blinking fast: execution of drop
cycle at the end of the defrost cycle;
Alarm LED (red): indicates the uni´st
alarm status according to the following
meanings:
LED ON: general alarm;
LED
blinking:
terminated within maximum delay;
Defrost LED (yellow): indicates that the
unit is executing the defrost cycle;
Dehumidification
indicates that the control requires
dehumidification operating mode;
Cooling LED (green): indicates that
the
unit is operating under cooling
mode;
LED-Bedienfeld

Control panel

9
blinking:
compressor
defrost
cycle
not
LED
(green):

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sch 100Sch 75Sch 120

Inhaltsverzeichnis