Clatronic EC 7012 Bedienungsanleitung Seite 26

NOTE:
• Some of the mobile phone brands have an energy­sav­
ing mode. Deactivate the energy­saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music re­
ceives a call, the music will be interrupted. However, the
sound is not played back by the device. After you have
ended the call, the devices are connected to each other
again and playback continues.
Playing Music via USB
This device has been developed in line with the latest tech­
nical advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com­
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device. Only
use commercially available USB sticks.
1. Press the FUNCTION / button repeatedly until " USB " is
shown on the display.
2. Connect a USB storage device directly into the port. After
that, " – – " appears in the display. Playback will automati­
cally start after a few seconds.
For operation, please refer to the section "Description of the
Control Buttons (BT / USB)".
NOTE:
• The device detects an USB flash drive that has been
already used. The playback starts with the most recently
played song.
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port ist not designed for charging external
devices.
• Please note: The USB port is only intended for playing
music from USB sticks. It only provides a low power
(100 mA) power supply. The USB port is not suitable
for using external 2.5" hard drives with start­up currents
of up to 1100 mA. In order to play music from your
smartphone, iPod or iPhone, connect the designated
AUX IN socket.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
26
EC7012_CTC_IM
Description of the Control Buttons (BT / USB)
NOTE:
Depending on your playback device, not all functions might
be supported.
/ (9)
You can pause and continue music playback. Press again to
continue playback.
(11)
Press once = Restart of the song from the beginning.
(Not during USB­mode)
Press twice = This jumps back to the previous track.
Press three times = This plays the song before etc.
When you hold down the button in USB mode, a music
search is started.
(10)
• Press to skip to the next song and the following songs.
• When you hold down the button in USB mode, a music
search is started.
P-MODE (14) (only during USB operation)
Press once = " " appears in the display. The
current song will be played repeatedly.
Press twice = " FOLDER " appears in the dis­
play. The selected folder will be played
repeatedly.
Press three times = " " appears in the display. All
songs will be played repeatedly.
Press four times = "RAND" appears in the display. All
songs will be played in random order.
Press five times = All functions are deactivated and the
device continues normal playback.
FOLD. / 10 (13) (only during USB operation)
• Press the button to skip 10 tracks. Provided there are
more than 10 songs available.
• Press and hold this button to switch to the next folder.
Playback starts from the selected folder.
Cleaning
CAUTION:
Do not immerse the device in water.
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
cloth without any additives.
21.09.17