AEG SANTO SK 48800-7I Gebrauchsanweisung Seite 39

6. Place guide (Ha) on the inside part of the
furniture door, up and down as shown in
the figure and mark the position of
external holes. After having drilled holes,
fix the guide with the screws supplied.
7. Fix cover (Hc) on guide (Ha) until it clips
into place.
8. Open the appliance door and the
furniture door at 90°. Insert the small
square (Hb) into guide (Ha). Put together
the appliance door and the furniture door
and mark the holes as indicated in the
figure.
39