Electrical Connection - AEG SANTO SK 48800-7I Gebrauchsanweisung

The climate classification can be found on the rating plate, which is
located inside the cabinet on the left hand wall.
The following table shows which ambient temperature is correct for
each climate classification:
classification

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on
the serial number plate correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized auto-
transformer must be used.
Important
The appliance must be earthed.
The power supply cable plug is provided with a contact for this
purpose.
If the domestic power supply socket is not earthed. connect the
appliance to a separate earth in compliance with current regulations,
consulting a specialist technician.
The Manufacturer declines all responsibility if the above safety
precautions are not observed.
This appliance complies with the following E.E.C.
Directives:
- 87/308 EEC of 2/6/87 relative to radio interference suppression.
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent
modifications.
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and
subsequent modifications.
Climate
SN
N
ST
T
for an ambient
temperature of
+10 to +32 °C
+16 to +32 °C
+18 to +38 °C
+18 to +43 °C
35