Cleaning And Care - GUTMANN 4500EM Bedienungsanleitung

EN

Cleaning and care

Cleaning the surfaces
Danger due to electric shock! Discon-
nect the extractor hood from the power
supply by pulling the plug out of the
socket or by switching off the fuse. When
cleaning, make sure that no water pene-
trates the device. Regular cleaning of the
surface saves laborious removal of stub-
born contamination. Only use conven-
tional detergents or universal cleaning
agents suitable for cleaning stainless
steel/aluminium. Never use abrasive
cleaning agents or steel wool. After
cleaning the hood, treat the stainless
steel surfaces with a stainless steel care
product. Painted surfaces should only be
cleaned using a mild detergent solution
and a very soft cloth. Only use a soft
damp cloth to clean the operating panel.
On hoods fitted with a panel below the
filter (edge extraction), grease deposits
occur at the edge of the panel. These
deposits occur for physical reasons and
are not due to a malfunction of the hood.
Please clean the panel underneath the
filter regularly to prevent the formation
of stubborn residues.
Cleaning and care instructions
When cleaning the grease filters, also
remove any grease deposits from the
accessible housing components. This will
prevent a fire hazard and maintain an
optimum range of functions. Use hot
soapy water or a mild window cleaning
agent to clean the hood. Do not scratch
off baked-on deposits. Soften them using
a damp cloth. Do not use abrasive agents
or scouring pads.
Note: Do not use alcohol (spirits) on plas-
tic surfaces, as dull spots may result.
Caution: Ventilate the kitchen suffi-
ciently, no open flame.
Only clean the operating panel with a
soft damp cloth (mild detergent solu-
tion). Do not use stainless steel cleaners
for the sliding switch/pressure switch.
38
Stainless steel surfaces:
Use a mild and non-abrasive stainless
steel cleaning agent. Do not clean
stainless steel surfaces with abrasive
scouring pads or with cleaning agents
containing sand, soda, acid or chloride!
Clean in direction of polish only.
We recommend our stainless steel
cleaner no. 461731. See the enclosed
service booklet for the order address.
Aluminium, varnished and plastic surfaces:
Use a soft micro fibre cloth. Do not use
dry cloths. Use a mild window-cleaning
agent. Do not use aggressive cleaning
agents or agents containing acid or lye!
Do not use scouring agents.