Led Display - GUTMANN 4500EM Bedienungsanleitung

2. Operation via micro pushbutton
The pushbutton for Emergency operation of the extractor is located on the appliance
behind the screen. The pushbutton is in fact two micro pushbuttons to control lighting
and fan speed in Emergency operation. Operate the two micro pushbuttons via the bore
holes in the glass using a pen or similar.
LED Anzeige
= Press pushbutton
Keep pressing pushbutton
Press pushbutton again
=
Press pushbutton once
Press pushbutton twice
Press pushbutton three times = Motor runs on level 3, 4 LEDs are on.
Press pushbutton four times
Keep pushbutton pressed for 3 sec = Motor will switch off, covers will close after approx.

LED display

You can read information about the extractor's operation state from the appliance's
LED display:
Light
Motor
ON / delayed shut-off
Level 1
Level 2
Level 3
Intense level
operation function; not all functions will be available).
= Lighting ON
= Dimming function is not available in this mode
= Lighting OFF
= Extractor EIN, motor runs on level 1, 2 LEDs are on.
= Motor runs on level 2, 3 LEDs are on.
= Motor runs on Intense level, 5 LEDs are on.
After 5 min, the motor will automatically return to level 3.
(LED flashes) white LED
white LED
white LED
white LED
white LED
(operation via pushbutton is an Emergency
EN
37