Unitec PROFIAZ-117 Gebrauchsanweisung Seite 8

Dear Customer,
Appropriate use
Safety instructions
for floor jack
8
10026 Bed._A5_130725.indd 8
Instructions for use
t
thank you for buying this trolley jack. Before putting it into operation and
using it, please carefully read the instructions for use and strictly follow
the notes therein. Following these instructions is necessary to prevent pos-
sible risks such as material damage and injuries.
Before using the floor jack, familiarise yourself with it and its functions so
that you can operate it correctly and above all safely. In case of uncertain-
ty and questions, please consult your dealer so that you can be told how to
operate it.
the manufacturer is not responsible for injuries and damage resulting from
these operating instructions being ignored.
Put these instructions on display so they can be read through later and
hand them out with the floor jack if you pass it onto other people.
this floor jack is only designed for lifting and lowering vehicles with a maxi-
mum rated load of 3000 kg (3.0 t) per lifting point. the floor jack 10026 com-
plies with en 1494/A1: 2008. Only for personal use. All other applications are
prohibited.
1. Only use the floor jack for its intended purpose.
2. Only use the floor jack for lifting and lowering vehicles. never lift perso-
ns with the floor jack!
3. Always be careful and attentive when handling the floor jack. When
attaching and dismantling accessories, such as the lifting rod, watch
your hands and fingers as there is a risk of crushing.
4. Before the lifting procedure, secure the vehicle being lifted from rolling
away unintentionally. Pull the parking brake on and put the vehicle in
gear. Secure the wheels not being lifted with suitable blocks.
5. Secure the lifted vehicle from lowering unintentionally by using suitable
chassis stands.
6. Do not work under the lifted load as long as it is not secured by suitable
means.
7. Make sure that the lifted vehicle cannot move on the floor jack.
8. Only use the floor jack on a firm, even and dry surface. the load can
easily slip on unfirm, uneven or damp/wet surfaces.
9. Always support the vehicle in the middle part of the mounting block.
10. Do not exceed the permitted rated load! the loading of the floor jack
must not exceed 2.0 tonnes, as this can be damaged if overloaded (e.g.
overloading the mechanical properties) and personal safety is therefore
no longer guaranteed.
11. take care that the floor jack is central and stable with the load sup-
ported under the lifting point of the vehicle being lifted. Only attach the
floor jack at the lifting points marked by the vehicle manufacturer. read
the vehicle's operating instructions for this purpose. Please consult an
authorised workshop if you have any doubts regarding the correct lifting
points on the vehicle.
12. Make sure that there are no pets, persons and body parts in the area
of the lifting arm, the cylinder or the mechanism during the lifting and
lowering procedure.
13. never allow persons to be situated in or under the vehicle being lifted
when using the floor jack.
25.07.13 14:13