REMEHA iBase Bedienungsanleitung Seite 26

OTm Digi
afb. 05 Inputs and outputs of the
iBase
T001084
5Vdc
5. If the boiler does not support OpenTherm
0 +
Smart Power, you must use an external
power adapter (5 Vdc 300mA). Connect
this to the power connection (grey,
indicated by 5 Vdc). The power adapter
is available as an accessory.
6. Close the housing of the Base station.
T001084-B
The Base station is now connected
and ready for use. The iSense RF is
automatically connected to the Base
station; see Chapter 5.
EN
26