Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Startup
Clean the cabinet before use. See section on maintenance.
Important note:
If the cabinet has been lying down during transport, wait 2 hours before starting.
Thermostat
The thermostat is located in the compressor compartment. To access, remove the ventilation grille.
See fig. 1.4.
Thermostat factory setting: approx. +2 ºC.
The thermostat can be set between -6 ºC to +10 ºC. Turn clockwise to lower temperature.
Thermometer:
The cabinet can be fitted with a thermometer which shows the internal temperature. See fig. 1.5.
Fig. 1.4
Fig. 1.5
9
Werbung
Inhaltsverzeichnis
