Maintenance; Metal Grease Filters - AEG DD6660-M Montageanleitung

10

MAINTENANCE

METAL GREASE FILTERS

Filters can be washed in the dish machine. They need
to be washed when F-sign appears on the display or in
any case every 2 months, or even more frequently in
case of particularly intensive use of the hood.
Alarm reset
• Switch off the hood and the lights.
• Press the D-key till the display is unlit.
Cleaning the fi lters
• Pull the comfort panels to open them.
• Remove the fi lters one by one pushing them towards
the back side of the hood unit and simultaneously
pulling downwards.
• Any kind of bending of the fi lters has to be avoided
when washing them. Before fi tting them again into
the hood make sure that they are completely dry.
(The colour of the fi lter surface may change through-
out the time but this has no infl uence to the fi lter
effi ciency).
• When fi tting the fi lters into the hood pay attention
that they are mounted in correct position the handle
facing outwards.
• Close the comfort panel.
EN