ZA-TEC ZA 1-3 Bedienungsanleitung Seite 17

Digital multimeter for
- DC voltage measurements
- AC voltage measurements
- DC current measurements
- AC current measurements
- resistance measurements
- diode tests
- continuity tests
- capacity measurements
- frequency measurements
- temperature measurements
Table of contents
1. User instructions
2. Safety instructions
3. Scope of delivery
4. Device description
5. General information
6. Ambient conditions
7. E lectrical specifications
8. Measuring with the ZA-TEC ZA 1-3
9. Maintenance
10. U sing the folding support and the suspension fixture
11. Technical data of measuring accessories
12. Environmental note
1. User information
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The ZA-TEC ZA 1-3 is intended for measurements under dry ambient condi-
tions. It must not be used in electrical circuits with a nominal voltage higher
than 1000 V DC and 750 V AC (see section 6 „Ambient conditions" for details).
The following symbols are used in this operating manual and on the
ZA-TEC ZA 1-3 :
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, must comply with documentation!

This symbol indicates that the information provided in the operating
manual must be complied with in order to avoid risks.
This symbol on the ZA-TEC ZA 1-3 indicates that the ZA-TEC ZA 1-3

is equipped with protective insulation (protection class II).
This symbol on the ZA-TEC ZA 1-3 indicates built-in fuses.
This symbol appears on the display to indicate a discharged battery.
This symbol designates the „diode test" range.
This symbol designates the "continuity test" field.
The buzzer is intended for acoustic result output.
This symbol indicates the „capacity test" field.
(DC) Direct voltage or current

(AC) Alternating voltage or current
Ground (voltage against ground).
11/ 2016
Operating manual
ZA-TEC ZA 1-3
ZA-TEC ZA 1-3

11