tetenal colortec E-6 Gebrauchsanweisung Seite 5

PROCESSING
STANDARD DEVELOPMENT AT 38 °C / 100 °F
Step
0 Pre-heat the
developer drum
1 First Developer
2 Washing
3 Colour Developer
4 Wash
5 Bleach Fix
6 Wash
7 Stabilizer
NOTES ON PROCESSING STEPS:
The times given represent the time from the first contact of the film with the relevant

bath to the first contact with the following bath or rinse.
Steps 0-2 to be carried out in complete darkness.

First Developer times must be adapted individually to suit the combination of deve-

loper machine, film make, speed of rotation and the proportion of film area to the
quantity of first developer.
Extended First Developer time (+ 25 %) = brighter slides by one stop (approx.), red-

uced (- 25 %) = darker slides by one stop (approx.)
Carry out rinses with running water or change water every 30 secs. or rinse over

longer periods.
Agitation Step 1 (FD), 3 (CD), 5 (BX): constantly during first 15 secs, then once every

15 secs.
Stabilizing is performed outside the tank.

Temp. °F Processing time
500 ml
1-2
Films
100 ± 0.5
100 ± 0.5 6' 15''
100 ± 1.0
100 ± 1.0 6' 00''
97 ± 5.0
97 ± 5.0 6' 00''
97 ± 5.0
68 - 77
1000 ml 500 ml
1-4 3-4 / 1-6
Films Films
5' 00''
6' 30''
2' 30''
7' 00''
2' 30''
7' 00''
4' 00''
1' 00''
1000 ml 500 ml
5-8 / 1-12 5-6
Films Films
6' 45''
8' 00''
8' 00''
1000 ml
9-12
Films
5