Troubleshooting; Maintenance And Cleaning; Disposal - Sygonix 1524062 Bedienungsanleitung

10. Troubleshooting

If the device is not working properly, first check to see if there is one of the following issues.
Problem
The device does not switch
on.

11. Maintenance and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
housing or even impair the functioning of the product.
• Disconnect the product from the power supply before cleaning and let it cool down sufficiently.
• Use a dry, lint-free cloth to clean the product.
• Do not immerse the product in water or other liquids.

12. Disposal

Electronic devices are recyclable waste and must not be disposed of in household waste. Always dispose
of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
24
Cause
No power to the mains socket
available or main fuse defective.
Plug has not been fully inserted.
The device was not switched on
with the on/off switch.
The room temperature is above the
temperature set on the thermostat.
The device has been covered.
Suggested resolution
Check the power supply and main fuse.
Plug the power cable into the mains
socket.
Switch the device on.
Normal operation. Device automatically
turns on and heats up as soon as the
temperature drops below the set value.
The thermal overheat protection was
activated. Never cover the device with
blankets, fabrics or other objects. Please
observe the recommended safety
distances. Wait until the appliance has
cooled down sufficiently. Switch the
device on.