Küppersbusch ITE1370-1 Benutzerinformation Seite 24

24
Ventilation requirements
min.
5 cm
200 cm
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
x
2
min.
200 cm
2
x
2
1
The airflow behind the appliance must be
sufficient.
Do the following steps:
If necessary cut the adhesive sealing strip
and apply it to the appliance as shown in
figure.
Install the appliance in the niche.
Push the appliance in the direction of the
arrow (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the
arrow (2) against the cupboard on the op-
posite side of the hinge.