Installation; Electrical Connection; Disconnecting The Appliance - Bauknecht KRI 1884 A+ Gebrauchsanweisung

Inhaltsverzeichnis

Verfügbare Sprachen

INSTALLATION

• Install the appliance away from heat sources.

Installation in a hot environment, direct

exposure to the sun or installation near heat

sources (heaters, radiators, cookers) will

increase power consumption and should

therefore be avoided.

• If this is not possible, the following minimum

distances must be respected:

• 30 cm from coal or paraffin stoves;

• 3 cm from electric and/or gas stoves.

• The appliance is designed for built-in. Install the

appliance into the kitchen units basing on the

required dimensions (see figure).

• Clean the interior.

• Fit the accessories.

• Electrical connections must be made in

accordance with local regulations.

• Voltage and power consumption are indicated

on the rating plate inside the appliance.

• Regulations require that the appliance is earthed.

The Manufacturer declines all liabilities for injury

to persons or animals or damage to property

resulting from failure to observe these

regulations.

• If the plug and socket are not of the same type,

have the socket replaced by a qualified

electrician.

• Do not use extension leads or adapters.

It must be possible to disconnect the appliance by

unplugging it or by means of a two-pole switch

fitted upline of the socket.

Inhaltsverzeichnis