Whirlpool WD 142 IX Gebrauchsanweisung Seite 23

For connection to the power supply, a
separation device for each pole must be
arranged by the installer.
Separation devices are switches with contact
gap of at least 3 mm.
The data necessary for replacement with the
connection is given on the rating plate. This
data must match that of the power supply.
The manufacturer declines any liability in case
of injury or damage resulting from incorrect
installation, improper or incorrect use of the
appliance.
The manufacturer also declines any liability
for damage (e.g. electric shock) caused by the
lack of or disconnection of the ground wire.
TYPES AND MINIMUM DIAMETER OF CABLES
H05RR-F 3x0.75 mm²
H05VV-F 3x0.75 mm²
H05RN-F 3x0.75 mm²
H05V2V2-F 3x0.75 mm² H05V2V2-F 3x1.5 mm²
SASO
H05RR-F 3x1.5 mm²
H05VV-F 3x1.5 mm²
H05RN-F 3x1.5 mm²
23