Electrical Connection - Whirlpool WD 142 IX Gebrauchsanweisung

ELECTRICAL CONNECTION
Contact a qualified technician to carry out
the appliance electrical connection.
WARNING
Before connecting the warming drawer to
the household electrical system to check
its operation, always make sure the drawer
power cable is correctly fitted and that it is
NOT pinched or caught under or behind the
drawer or any coupled appliance.
WARNING
Power cable replacement must be done by the
After-Sales Service or a qualified technician,
with a cable having the same characteristics
as the one provided by the manufacturer
(H05RR-F 3x0.75 mm
Before electrically connecting the appliance,
make sure the mains power supply matches
the rating plate data.
If in doubt, contact a qualified technician.
Contact a qualified technician familiar with
the local regulations and the additional
regulations issued by the local utility
company, and that the work is carried out
in compliance with the same. Important:
Make sure the appliance is connected to an
approved ground wire, to ensure electrical
safety. If necessary, have the system checked
by a specialized technician.
The manufacturer declines any liability in case
of injury or damage resulting from the lack of
or disconnection of the ground wire.
22
or higher).
2
WARNING
Grounding is compulsory by law.
The appliance is designed to be used only
when correctly fitted.
Never open the appliance enclosure. In case
of contact with live wires or if the electrical
and mechanical structure is changed,
malfunctioning of the appliance may occur
when in use.
If installation, maintenance or repairs are not
carried out correctly, there can be risks for the
user.
The manufacturer declines any liability for
such damage or injury.
During the warranty period, repairs can only
be carried out by the authorized after-sales
service, otherwise the right to warranty will be
lost.
Installation, repair and cleaning should be
done only after making sure the appliance
is disconnected from the power supply. The
appliance is disconnected from the power
supply in the following cases:
- operating the main electrical system
omnipolar switch.
- operating the main electrical system safety
switch.