Troubleshooting; Possible Cause - Scheppach Df-24T Original Bedienungsanleitung

15. Troubleshooting

Fault
Motor does not work.
The engine runs slowly
and does not reach the
operating speed.
Engine producing
excessive noise.
The motor does not reach
its full power.
Motor overheats easily.

Possible cause

Motor, cable or plug defective, fuses
burnt
Voltage too low, coils damaged,
capacitor burnt
Coils damaged, motor defective
Circuits in the network are
overloaded (lamps, other motors,
etc.)
Overloading of the motor, insufficient
cooling of the motor
www.scheppach.com
Remedy
Arrange for inspection of the machine by a
specialist.
Never repair the motor yourself. Danger!
Check fuses and replace if necessary
Contact the utility provider to check the
voltage. Arrange for inspection of the motor
by a specialist. Arrange for replacement of
the capacitor by a specialist.
Arrange *pnspection of the motor by a
specialist.
Do not use any other equipment or motors
on the same circuit.
Avoid overloading the motor, remove dust
from the motor in order to ensure optimal
cooling of the motor.
GB | 23