Technical Data; Before Commissioning; Assembly - Scheppach Df-24T Original Bedienungsanleitung

• Allow the product to completely dry before connect-
ing to the mains for before storing. Allow the product
to completely cool off before storage.
• Store the product in a cool, dry location protected
from moisture and out of reach of children.
Residual risks
The electric tool has been built according to state-
of-the-art and the recognised technical safety
rules. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Important in-
formation" and the "Proper use" are observed along
with the whole of the operating instructions.
• Avoid accidental starting of the machine: the start
button may not be pressed when inserting the plug
in a socket.
• Keep your hands away from the work area, when the
machine is in operation.
• Before performing setting or maintenance work, re-
lease the start button and pull out the power plug.
m WARNING
This power tool generates an electromagnetic field dur-
ing operation. This field can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical im-
plant prior to operating the power tool.

6. Technical data

Rated voltage
Rated input
Protection category
Speed levels
Fan speed
Drum diameter
Weight
Technical changes reserved!
20 | GB
220–240 V~ 50 Hz
180 W
IPX0
3
Level 1: 1050 rpm
Level 2: 1100 rpm
Level 3: 1300 rpm
600 mm
11 kg
www.scheppach.com
7.

Before commissioning

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, keep the packaging until the expiry of the
warranty period.
• Before connecting the machine, make certain that
the data on the type plate matches with the mains
power data.
m ATTENTION
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!
Connection to the mains
Check whether the network to which you connect the
machine is properly earthed according to the valid
standards and whether the outlet is in good condition.

8. Assembly

m WARNING! Electric shock
Unplug the mains plug from the socket before carrying
out any work on the machine!
Installing the transport wheels (Fig. B)
1. Guide the wheel axle (9) through the opening on
the foot (5) and align the hole pattern of both com-
ponents accordingly. Make sure that the longer
side of the wheel axle (9) faces towards the side of
the on/off switch (7).
2. Screw the wheel axle (9) to the foot (5). Use the
two M5x12 screws (10) and a Phillips screwdriver
(not included in the scope of delivery).
3. Insert the wheel bolt (8) through the transport
wheel (6) and screw it to the wheel axle (9). Use an
open-ended spanner size 17 for this (not included
in the scope of delivery).