Using Main Tv Menu; Inserting The Batteries Into The Remote; Power Connection - Telefunken Xf49G511 Bedienungsanleitung

Changing Channels and Volume
You can change the channel and adjust the volume
by using the Programme +/- and Volume +/- buttons
on the remote.

Using Main TV Menu

When the Menu button is pressed, the main TV menu
will appear at the bottom of the screen. You can
navigate through the menu items using the directional
buttons on the remote. To select an item or see the
sub-menu options of the highlighted menu press OK
button. When you highlight a menu option some of the
sub-menu items of this menu may appear on the upper
side of the menu bar for quick access. To use a quick
access item highlight it, press
using the Left/Right directional buttons. When finished
press OK or Back/Return
Press Exit button to close the main menu.
1. Home
When main menu is opened
be highlighted. The content of the
be customised by adding options from other menus.
Just highlight an option and press the Down direction
button on the remote. If you see
you can add it to the
can delete or change the position of any item in the
Home menu. Press the Down direction button and
select Delete or Move option and press OK. In order
to move a menu item use the Right and Left direction
buttons to select the position that you want the item
to move to and press
2. TV
2.1. Guide
You can access the electronic programme guide menu
using this option. Refer to Electronic Programme
Guide section for more information.
2.2. Channels
You can access the Channels
Refer to Using the Channel List
information.
2.3. Timers
You can set timers for future events using the options of
this menu. You can also review the previously created
timers under this menu.
To add a new timer select the
Left/Right buttons and press
options as desired and when finished press OK. A new
timer will be created.
To edit a previously created timer, highlight that timer,
select the Edit Selected Timer
Change the sub-menu options as desired and press
OK to save your settings.
To cancel an already set timer, highlight that timer,
select Delete Selected Timer tab and press OK. A
OK and set as desired
button to exit.
Home menu bar will
Home menu can
Add to Home
Home
menu. Same way you
OK .
menu using this option.
section for more
Add Timer tab using the
OK . Set the sub-menu
tab and press
confirmation message will be displayed. Highlight Yes
OK
and press
It is not possible to set timers for two or more events
that will broadcasted in different channels at the same
time interval. In this case you will be asked to choose
one of these timers and cancel others. Highlight the
timer you want to cancel and press OK, Options menu
will be displayed. Then highlight
OK to cancel that timer. You will have to save changes
after that. In order to do that press
Changes and press
3. Settings
You can manage the settings of your TV using the op-
tions of this menu. Refer to Settings Menu Contents
section for more information.
4. Apps
When your TV is connected to the Internet related
contents will also be available, including Apps related
contents. Using the
manage your applications. You can add new apps from
the market or delete the existing ones. Refer to Apps
section for more information.
5. Sources
option
You can manage your input source references using
the options of this menu. To change the current source
highlight one of the options and press
5.1. Source Settings
Edit the names, enable or disable selected source
options.

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compart-
ment. Insert two size
and (-) signs match (observe correct polarity). Do not
mix old and new batteries. Replace only with same or
equivalent type. Place the cover back on.
A message will be displayed on the screen when the
batteries are low and must be replaced. Note that when
the batteries are low, the performance of the remote
control may be impaired.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.

Power Connection

IMPORTANT: The TV set is designed to operate on a
220-240V AC, 50 Hz supply. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains. Plug the power cable
to the mains socket outlet.
OK.
English - 5 -
to proceed. The timer will be cancelled.
Set/Cancel
OK
OK again.
Apps menu you can access and
AAA batteries. Make sure the (+)
and press
, highlight Save
OK
.