ClearSound AMPLICALL 20 Bedienungsanleitung Seite 8

INSTALLATION
Change The Battery of Indoor unit (option)
The unit requires 4×AA batteries
1. Open the battery compartment door.
2. Insert 4 x AA batteries into the battery compartment.
3. Snap the battery compartment door back into place.
Note: when the red LED indicator flashes, it is time to
replace the batteries.
Whilst replacing the batteries, disconnect all telephone
line cords from the modular wall jacks.
Second Amplicall 20
Another Amplicall 20 can be added to the system (call
01707 384483)
Change the Battery of the Door bell
The door bell is supplied with a 23A 12V battery. The
Door bell is supplied ready to use, it is not necessary to
open the Door Bell when you first install the Amplicall 20.
To replace the battery, unscrew the door bell from the
wall, unscrew the five screws located on the base and
open the box to get access to the battery compartment.
Replace the battery, replace back and remount.
7