Table Mounting
If you want to mount the unit on a table, simply place it in
the base cradle and place the base cradle on a table.
Setting the Alarm Mode
Choose which alarm mode you want by moving the alarm
mode switch to one of the following positions:
0
:no alarm
:both strobe flasher and sound alarm activated
:both strobe flasher and shaker (if connected)
activated
:both sound alarm and shaker (if connected)
activated
Volume Control Slide Switch
Use the slider control to adjust the volume of the door bell
ring, phone ring or power OFF
Tone Control Switch (3 Positions)
Set the tone of the alarm sound.
Door Bell Tone Control
The three position switch allows you to set a different
tone when the door bell rings.
INSTALLATION
6