Dmx Operation; Functions In Dmx Mode - Eurolite Led Silent Par 12X10W Rgbl Bedienungsanleitung

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 9 control channels.
However, it can also be switched to a mode with 4 or 6 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button until Addr is indicated in the display. Confirm with the ENTER button. Now the
display indicates the menu item for the DMX starting address (A001). Use the buttons UP and DOWN to
set the desired starting address. Confirm with the ENTER button.
2 Press the button MENU and then the button DOWN until CHnd is indicated on the display. Confirm with
the ENTER button. The menu for the DMX modes is called up.
3 The display indicates 4 CH (4 DMX channels), 6 CH (6 DMX channels) or 9 CH (9 DMX channels). Use
the buttons UP and DOWN to select the desired DMX channel mode. Confirm with the ENTER button.
4 DMX is indicated when a dot on the display is lit.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed to the
same address, they will work synchronously.
Note: If there is no DMX signal, the LEDs will turn off (blackout).

Functions in DMX mode

4-channel mode
Channel
1
000 – 255
Red
2
000 – 255
Green
3
000 – 255
Blue
4
000 – 255
Lime
6-channel mode
Channel
1
000 – 255
Red
2
000 – 255
Green
3
000 – 255
Blue
4
000 – 255
Lime
5
000 – 255
Master Dimmer
000 – 005
6
Strobe Effect
006 – 255
Value Function
Intensity 0-100%
Intensity 0-100%
Intensity 0-100%
Intensity 0-100%
Value Function
Intensity 0-100%
Intensity 0-100%
Intensity 0-100%
Intensity 0-100%
Total brightness 0-100
No function
Strobe effect with increasing speed
28/32 00166163, Version 1.0