LENCO Xemio-280 Benutzerhandbuch Seite 6

Important: The battery does not charge when your computer is in
sleep. The USB port on most keyboards does not provide enough
power to charge the player. Connect player to a USB 2.0 port on
your computer only to prevent charge problem.
3. Connecting and Disconnecting Player
a. To Connecting Player:
•
To connect player to your computer, plug the connector of
USB Cable into a USB port on your computer, and connect the
other end to player,
•
Then the player is ready for media files transfer with your
computer and the battery is charging when "Charge &
Transfer" mode is selected. And the "Connect" screen is
appearing for view.
•
Now you can transfer the media files by using the computer
mouse use drag and place, or copy and paste, in between the
player and your computer.
b. To Disconnecting Player:
It's important not to disconnect player while it's syncing or
transferring files. Eject the player before disconnect it.
•
To eject player, press once the M button, the connecting
screen will switch to "Main Menu" screen. And now is safe to
disconnect the player with your computer. Unplug the USB
cable from the player. Or,
•
If you're using a Windows PC, you can also eject player in My
Computer or by clicking the "Safely Remove Hardware" icon
in the Windows system tray, select the correspondence name
of USB Device and choose "Stop" > choose "Confirm" >
choose "Confirm" follow by the pop-up windows you're your
computer.
•
If you're using a Mac, you can also eject player by dragging the
player icon on the desktop to the Trash.
•
Disconnect the USB cable from the player and computer,
simply remove it.
•
If you accidentally disconnect player without ejecting it,
reconnect it to your computer and sync again. However, some
media file may loss.
6