Specifications; Declaration Of Conformity; Warranty - Raikko HEAVY METAL BT Bedienungsanleitung

English
In cable mode, the volume can be adjusted via the device.
VoLUMe
Caution! It is indeed possible to overload the speaker with an
excessive signal level. Select a volume level where there
is no distortion.
High sound levels can damage your hearing. Do not hold
the speaker directly against your ear, other people's ears
or animals' ears.
CHARGInG tHe HeAVY MetAL Bt
Connect the HEAVY METAL BT
USB mains adapter to charge it. Use the supplied connection cable
for this purpose. Connect one end to the charging socket (6) of the
HEAVY METAL BT (Micro-USB) and the other to the corresponding
®
USB port. During charging the LED display lights up red.
If the display goes off the battery is fully charged.
A complete charging cycle takes roughly 5 hours.
Important! Turn the HEAVY METAL BT
to be charged. Otherwise, existing Bluetooth
blocked. In this case, the device must be paired again.
After connecting the charger cable, the device can be
used again.
18
HEAVY METAL Bluetooth
®
to the USB port of a PC/MAC™ or a
®
off before connecting it
®
will be
®
English
®

speCIFICAtIons

Dimensions: (L) 186 × (W) 55 × (H) 80 mm
Weight: 555 g
Music output: 2x 3 watt
Battery type: Lithium ion
Battery capacity: 1500 mAh/3.7 V
Charging voltage: 5 V (USB)
Frequency range: 40 Hz~19 KHz
Connections: 1x Micro-USB (charging socket); 1x Line IN (3.5 mm);
Bluetooth (wireless)
®
Bluetooth standard: 2.1 + EDR (A2DP, AVRCP)
®

deCLARAtIon oF ConFoRMItY

The CE Declaration of Conformity and all other mandatory
information can be viewed at http://www.RAIKKO.com/cert/.

WARRAntY

To activate the warranty period and for further information about
new products, please register your purchase at
http://www.RAIKKO.com/register/. To do this, you will need the
serial number, which is normally located on the underside of the
product.
HEAVY METAL Bluetooth
®
19