Wireless Connection - SPEEDLINK STRIKE NX Bedienungsanleitung

First, charge the gamepad. Using the USB cable, connect the
gamepad to any free USB port on your computer or any other
USB power source (at least 500mA). The gamepad's LED status
indicators will flash during charging which takes around 3 hours;
be aware, the initial charge may take longer. As soon as the LEDs
go out, charging is complete and you can disconnect the cable.
Please download and install the latest driver from
www.speedlink.com/support. Plug the USB receiver into a free
USB port on your PC. The operating system will detect the device
automatically and it will be ready to use in a few seconds.
To establish a connection, press the gamepad's Mode button and
wait around five seconds. Make sure the gamepad is positioned
near the receiver during this time. During the connection process,
the LEDs on the gamepad and on the receiver will flash; as soon
as a connection is established, the receiver LED as well as at least
Keep the Mode button held depressed for six seconds to switch
between the gamepad's two operating modes: XInput (for the
majority of current games) and DirectInput (for all older and some
newer games). Set the gamepad to the desired mode before
starting a game. Switching during gameplay may stop the game
identifying the controller correctly; if this happens, restart the
game. Please consult the manual that accompanied the game, ask
the publisher or try both modes to establish which mode works
1. CHARGING
2. CONNECTING

3. WIRELESS CONNECTION

one of the gamepad LEDs will stay lit.
4. XINPUT AND DIRECTINPUT
EN
the best.