Before Using The Solaredge Key - SolarEdge Key Bedienungsanleitung

Chapter 2: Using the SolarEdge Key

LCD display – with 8 characters

ON/OFF button – turns the unit ON and OFF

Menu buttons - each with two functionalities , as described in
the following table:
Button Press
Short Press
(less than 1sec)
Long Press
(more than 1 sec)

Before Using the SolarEdge Key

1
Make sure the SolarEdge Key is not connected to a string.
2
Open the SolarEdge key back cover.
3
Insert three AA batteries (nominal voltage 1.5V; not supplied)
into the battery compartment and close the cover.
4
Press the ON/OFF button (
LOW BAT appears, replace batteries.
5
Press the ON/OFF button to turn the SolarEdge Key OFF. The
message End appears on the LCD and then the SolarEdge Key
turns OFF.
12
SafeDC
Enable / Esc
Esc
Enable safety
voltage
) to turn the SolarEdge Key ON. If
SolarEdge Key User Guide MAN-01-00131-1.2
Display
Button
Toggle
Display
N/A
SafeDC
Disable /
Confirm
Confirm
Disable safety
voltage